In modern warfare, the proliferation of combat unmanned aerial vehicles (UAVs) poses significant threats due to their mobility, stealth, and destructive capabilities. Traditional countermeasures, such as anti-aircraft artillery, multi-barrel rocket launchers, and surface-to-air missiles, often rely on point-to-point interception, which can be inefficient and costly against evolving UAV technologies. To address this, we propose an innovative anti-UAV interception method using a space net system—a flexible, large-deformation structure designed to deploy rapidly in mid-air and engage targets with explosively formed penetrators (EFPs). This approach leverages a “area-intercept-point” strategy, enhancing cost-effectiveness and expanding the temporal and spatial windows for near-field defense. In this study, we focus on the traction deployment performance and airborne attitude of the space net, combining numerical simulations with ground validation tests to verify its feasibility for anti-UAV applications. Our work aims to provide a reference for the simulation and experimental research of large-deformation flexible systems in defense contexts.

The concept of flexible space nets originated from satellite missions for capturing orbital debris, but its adaptation for anti-UAV operations introduces unique challenges, such as complex low-altitude aerodynamic environments and the need for robust structural integrity. Unlike conventional rope nets, our space net features a hexagonal dual-line topology composed of Kevlar fabric strips, canopy units, and EFP warheads, all coordinated by a central distance sensor. This design improves net stability and ensures effective engagement with hostile UAVs. The interception process involves launching six tractors to pull the net from a storage container, allowing it to expand in flight. When the net reaches an optimal altitude (20–200 m) with over 80% of its maximum area deployed, the EFPs are detonated to generate high-velocity jets, destroying the target. This method is particularly suited for countering advanced anti-UAV threats, including stealthy and swarming UAVs, by creating a wide interception zone.
To analyze the deployment dynamics, we developed a detailed mechanical model of the space net. Given its flexible nature and large deformations, we discretized the net into multiple segments, treating each as a “lumped mass-spring-damper” model. This approach simplifies the complex interactions while capturing essential behaviors. The net ropes are assumed to withstand only axial tension, not compression, and are modeled as spring-damper elements connecting nodal points. For a segment N, the mass is concentrated at its endpoints, and the dynamics are governed by Newton’s second law. The coordinate transformation between the inertial frame and the local frame of a rope segment is defined using Euler angles. Specifically, the transformation matrix \( B_N \) is derived as follows:
$$B_N = \begin{bmatrix}
\cos \phi_N & \sin \phi_N & 0 \\
-\sin \phi_N \cos \theta_N & \cos \phi_N \cos \theta_N & \sin \theta_N \\
\sin \phi_N \sin \theta_N & -\cos \phi_N \sin \theta_N & \cos \theta_N
\end{bmatrix}$$
Here, \( \phi_N \) and \( \theta_N \) are Euler angles, and we neglect \( \psi_N \) due to the rope’s inability to resist bending moments. The mass matrix in the local frame is \( M_{n,N} = \text{diag}[m_N + m_{t,N}, m_N + m_{t,N}, m_N] \), where \( m_N \) is the segment mass and \( m_{t,N} \) is the tangential component. In the inertial frame, the nodal mass matrix \( M_N \) and fluid force \( F_N \) are approximated by averaging contributions from adjacent segments:
$$M_N = \frac{1}{2} [B_N M_{n,N} B_N^T + B_{N+1} M_{n,N+1} B_{N+1}^T]$$
$$F_N = \frac{1}{2} (B_N F_{n,N} + B_{N+1} F_{n,N+1})$$
The equation of motion for node N is then expressed as:
$$M_N [\ddot{x}_N, \ddot{y}_N, \ddot{z}_N]^T = B_{N+1} T_{N+1} – B_N T_N + F_N + M_N g$$
where \( T_N \) is the tension vector in the local frame, and \( g \) is gravity. This model accounts for aerodynamic forces, which are crucial for anti-UAV operations in low-altitude environments. By solving these equations numerically, we simulate the net’s deployment, including its shape changes, internal forces, and trajectory.
For simulation, we used finite element analysis with LS-DYNA, modeling net ropes as LINK167 elements (truss elements with tension-only properties) and canopies as SHELL elements. Tractors and EFP warheads were treated as rigid bodies with SOLID164 elements. Material properties were assigned based on Kevlar for the net, aluminum alloy for EFPs, and tungsten alloy for tractors, as summarized in Table 1. These choices ensure realistic behavior during high-speed deployment against anti-UAV threats.
| Material | Density (kg/m³) | Elastic Modulus (kPa or GPa) | Poisson’s Ratio |
|---|---|---|---|
| Kevlar (Net/Canopy) | 1.65 | 1.7989 × 10⁷ (axial), 1.9480 × 10⁶ (circumferential) | — |
| Aluminum Alloy (EFP) | 2710 | 69 GPa | 0.33 |
| Tungsten Alloy (Tractor) | 17700 | 324 GPa | 0.303 |
Contact constraints were defined using *CONSTRAINED_EXTRA_NODES for rigid-flexible connections (e.g., tractors to ropes) and *CONSTRAINED_NODAL_RIGID_BODY for flexible-flexible bonds (e.g., canopies to ropes). The simulation was conducted in two steps: first, the net was retracted into a folded state mimicking storage; second, it was deployed with an initial velocity of 80 m/s at a 0° launch angle, consistent with ground tests. This process allowed us to study the net’s behavior over 6 seconds, covering expansion and descent phases relevant to anti-UAV interception scenarios.
Simulation results revealed key insights into the space net’s deployment for anti-UAV applications. The net exhibited initial rope entanglement, but quickly expanded due to tractor pull. Internal forces oscillated as ropes tightened and loosened, with peak tension reaching approximately 47.61 kN at 0.06 s near the tractor attachment points. The net achieved maximum deployment area at around 2.5 s, with an expansion rate exceeding 86%. Notably, radial ropes experienced higher tensions than circumferential ones, and canopy nodes provided stability, which is vital for maintaining EFP alignment against moving UAV targets. The net’s shape transitioned from a compact bundle to a full hexagonal form, then contracted slightly before descent. Figure 1 illustrates the tension distribution and net configuration at selected times, highlighting the dynamic nature of the anti-UAV system.
To validate the simulation, we conducted ground launch tests under identical conditions. The test setup included a vertical storage box, six tractors propelled by 15 g of double-base propellant, and high-speed stereo cameras for tracking. We measured the 3D coordinates of 18 EFP warheads (nodes 13–30) and calculated the effective interception area defined by an inner hexagon. The net’s flight was recorded over 5.81 seconds, with an ascent phase until 2.77 s and a descent thereafter. Due to air resistance and crosswinds, the trajectory deviated slightly from vertical, but the net maintained a stable attitude suitable for anti-UAV engagement. Key parameters from the test are shown in Table 2, demonstrating the net’s performance in real-world conditions.
| Time (s) | Maximum Height (m) | Effective Area (m²) | Expansion Rate (%) | Remarks |
|---|---|---|---|---|
| 0.5 | 5.2 | 8.34 | 51.4 | Initial expansion |
| 1.5 | 12.7 | 13.89 | 85.5 | Near-maximum area |
| 2.56 | 19.9 | 14.75 | 90.8 | Peak deployment |
| 3.5 | 18.3 | 12.01 | 73.9 | Descent phase |
| 5.0 | 9.8 | 6.72 | 41.4 | Approaching ground |
Comparative analysis between simulation and test data shows strong agreement, confirming the space net’s efficacy for anti-UAV interception. The net’s height profile, as plotted in Figure 2, indicates that simulation predicted a slightly higher maximum altitude (20.1 m vs. 19.9 m in tests) and an earlier peak time, but both curves share similar trends, including a plateau near maximum height that signifies a favorable time window for engaging UAVs. The effective area expansion rates aligned closely, with simulation reaching 86% and tests achieving 90.8%, both above the 80% threshold required for reliable anti-UAV operations. Discrepancies are attributed to aerodynamic modeling simplifications and environmental factors in tests, but overall, the net demonstrated robust deployment kinematics.
We further analyzed internal forces at five characteristic points (A to E) on the net, as shown in Figure 3. Point A, located on an outer edge rope, exhibited large tension fluctuations due to direct tractor pull, while point B, on a radial inner rope, sustained the highest maximum force, critical for withstanding anti-UAV impacts. Points C and D, on circumferential ropes, had lower but oscillating tensions, and point E, near the center, showed minimal forces, underscoring the stabilizing role of canopies. The force patterns followed a cyclic “increase-decrease” rhythm, reflecting wave propagation along the net. These insights help optimize net design for enhanced durability against UAV threats.
The velocity profiles at these points, plotted in Figure 4, decayed over time, with outer points (A and E) experiencing more volatility due to aerodynamic drag. This behavior influences the net’s ability to maintain formation when intercepting high-speed anti-UAV targets. By correlating force and velocity data, we can refine launch parameters, such as initial speed or tractor mass, to improve deployment consistency for diverse anti-UAV scenarios.
Our discussion emphasizes the space net’s advantages for anti-UAV defense. Compared to traditional nets, its hexagonal topology and canopy-integrated EFPs enable larger coverage and precise targeting. The dynamics model accurately predicts deployment traits, allowing for pre-mission simulations to tailor the system against specific UAV types, such as stealth drones or swarms. However, challenges remain, including wind effects and synchronization of EFP detonation. Future work will involve advanced aerodynamic modeling, field tests with actual UAVs, and integration with sensing networks for autonomous anti-UAV systems. The space net represents a scalable solution that can be adapted for various platforms, from ground-based launchers to airborne deployers, broadening its anti-UAV applicability.
In conclusion, we have demonstrated through simulation and experiment that the space net is a viable anti-UAV interception tool. Its traction deployment performance meets operational requirements, with rapid expansion and stable airborne attitudes. The numerical model validated by ground tests provides a foundation for further development. As UAV technology evolves, flexible net-based systems offer a cost-effective and adaptive countermeasure, potentially revolutionizing near-field defense strategies. We recommend continued research into materials, deployment mechanisms, and AI-driven control to enhance this anti-UAV capability, ensuring protection for critical assets in modern battlefields.
The mathematical framework for the space net dynamics can be extended to include more detailed aerodynamic forces. For instance, the fluid force \( F_N \) can be modeled using drag equations:
$$F_{n,N} = -\frac{1}{2} \rho C_d A_N |v_N| v_N$$
where \( \rho \) is air density, \( C_d \) is drag coefficient, \( A_N \) is reference area, and \( v_N \) is velocity vector. Incorporating this improves realism for anti-UAV simulations in windy conditions. Additionally, the net’s deployment efficiency \( \eta \) can be defined as:
$$\eta = \frac{A_{\text{effective}}}{A_{\text{max}}} \times 100\%$$
where \( A_{\text{effective}} \) is the achieved area and \( A_{\text{max}} \) is the theoretical maximum. Our tests showed \( \eta > 90\% \), indicating high efficacy for anti-UAV engagements.
Table 3 summarizes key simulation parameters used in this study, which can guide future anti-UAV net designs.
| Parameter | Value | Description |
|---|---|---|
| Net Material | Kevlar | High strength, lightweight |
| Number of Tractors | 6 | Ensures symmetric pull |
| Launch Velocity | 80 m/s | Optimized for rapid deployment |
| Simulation Time | 6 s | Covers full flight cycle |
| EFP Warheads | 18 | Provides multi-directional strike |
| Target Altitude | 20–200 m | Typical anti-UAV engagement range |
Overall, this research underscores the importance of flexible structures in modern anti-UAV defense. By combining theoretical models, computational simulations, and empirical testing, we advance the development of reliable interception systems. The space net’s ability to deploy quickly and maintain form under dynamic loads makes it a promising tool against evolving UAV threats, contributing to global security efforts. As we refine this technology, collaborations with defense agencies and industry partners will accelerate its deployment in real-world anti-UAV applications, from military bases to civilian infrastructure protection.
